4.4 E1 Line Programming
374 E1 Programming
[758] E1 DR2 Signalling Type
Description
Sets a DR2 signalling type.
Normal: CCITT
Option-1: ANSI
Option-2: CCITT + MFC-R2 (Group-C)
Option-3: Dialling mode=ANSI, Receiving mode=CCITT
This programme is available for the KX-TD1232 only.
Selection
Normal / Option-1 / Option-2 / Option-3
Default
Normal
Programming
1.
Enter 758.
Display: 758 DR2 SIGNAL
2.
Press NEXT.
Display example: Normal
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
