3.4 Extension Programming
ISDN Programming 337
[617] CLIP / COLP Number Assignment for Extension
Description
Selects the type of additional number for the CLIP and COLP information when making and
answering a call through an ISDN line. You can select the type from one of the following:
DDI
: Subscriber number + DDI number
None
: Subscriber number + Optional number
Selection
• Jack number:
KX-TD816 –
01 through 16 (-1 / -2)
KX-TD1232 –
01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
• Types:
DDI / Any number, 6 digits (max.)
Default
All jacks – DDI
Programming
1.
Enter
617
.
Display: 617 CLIP/COLP #
2.
Press
NEXT
.
Display: Jack NO?
3.
Enter a
jack number
.
To enter jack number 01, you can also press
NEXT
.
To select the second part (-2), press
NEXT
after entering the jack number.
Display example: #01-1:DDI
4.
Press
SELECT
until the desired selection is displayed and enter the number, if required.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE
.
6.
To programme another jack, press
NEXT
or
PREV
, or
SELECT
and the desired
jack
number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
To Next Page
Loading...
