2.2 System Programming
General Programming 107
[135] DID Number Conversion Selection
Description
Selects whether the Direct Inward Dialling (DID) number is allocated as an extension number
or is converted using the Transfer Table.
Selection
EXT Number / Transfer Table
Default
EXT Number
Programming
1.
Enter
135
.
Display: 135 DID SELECT
2.
Press
NEXT
.
Display: EXT Number
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• The DID number is converted from the DID subscriber number using the programmes
[433] DID / TIE Subscriber Number Removed Digit and [434] DID / TIE Added
Number.
• Programmes [136] through [139] are required to use the Transfer Table.
Features Guide References
Direct Inward Dialling (DID)
To Next Page
Loading...
