2.3 Timer Programming
142 General Programming
[216] Message Waiting Ring Interval Time
Description
Sets the Message Waiting ring interval time for a single line telephone.
Selection
Time (minutes):
0 through 64
(0=no ring)
Default
0 min
Programming
1.
Enter
216.
Display: 216 MW RING TIME
2.
Press
NEXT.
Display example: Interval: 0 min
3.
Enter the
time
.
To change the current entry, press
CLEAR
and enter the new time.
4.
Press
STORE.
5.
Press
END.
Conditions
• When the interval time is set to "0", the telephone does not ring for Message Waiting
notification.
• Selecting the message waiting ring type, 3 quick rings or 2 normal rings, in programme
[990] System Additional Information, Area 5 - Bit 11 is available. If you prefer soft
ringing, select "3 quick rings". In this case, there may be some kinds of telephones which
do not ring.
Features Guide References
Message Waiting
To Next Page
Loading...
