4.2 E1 Outside Line Programming
346 E1 Programming
Conditions
• Each number has a maximum of 16 digits, consisting of
0 through 9
.
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To display parts of the number which have scrolled off the display, press or .
• Outside lines 25 through 54 become available when the KX-TD290 or KX-TD188
expansion unit is installed in the KX-TD1232.
• Your telephone number will be informed to the called party if the outgoing CLIR feature is
disabled for the ISDN line in programme [419] ISDN Outgoing CLIR Service
Assignment.
• Your telephone number will be informed to the calling party if the COLP feature is enabled
for the ISDN line in programme [990] System Additional Information, Area 06-Bit 11.
Features Guide References
Calling / Connected Line Identification Presentation (CLIP / COLP)
Calling Line Identification Restriction (CLIR)
E1 Line Service
Incoming Outside Call Information Display
To Next Page
Loading...
