3.4 Extension Programming
334 ISDN Programming
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the key in step 3. In this case, the display shows
the contents programmed for Port 01.
• To assign all outside lines to one selection, press the key in step 4. In this case, the display
shows the contents programmed for outside line 01.
• When you change a port number by pressing
NEXT
or
PREV,
the outside line number is
not changed.
Example #03:CO02.......Pressing
NEXT
....#04:CO02
Features Guide References
Day / Night Service
Outside Line Connection Assignment – Outgoing
To Next Page
Loading...
