Panasonic KX-TD816 - Page 225

2.5 Outside Line Programming
General Programming 225
2.
Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter outside line number 01, you can also press
NEXT
.
Display example: CO01:
4.
Enter a
group number
.
To change the current entry, press
CLEAR
and the new number.
Display example: CO01:1
5.
Press
STORE
.
6.
To programme another location, press
NEXT
or
PREV
.
7.
Repeat steps 4 through 6.
8.
To programme another outside line, press
SELECT
and the desired
outside line number
.
9.
Repeat steps 4 through 8.
10.
Press
END
.
Conditions
• If a destination for this programming is not assigned, the assignment for DIL 1:1 (Day) /
DIL 1:N performs in day mode as usual.
Features Guide References
Day / Night Service
Direct In Lines (DIL)