2.7 Extension Programming
250 General Programming
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number" in Section
1.3 Programming Methods.
• To assign all jacks or all outside lines to one selection, press the key in step 3 or 4. In
these cases, the display shows the contents programmed for Jack 01 or outside line 01.
• To assign no outside line for an extension, press
CLEAR
in step 4.
Features Guide References
Day / Night Service
Outside Line Connection Assignment – Outgoing
To Next Page
Loading...
