3.3 ISDN Line Programming
306 ISDN Programming
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• Each added number has a maximum of four digits, consisting of
0 through 9
.
• To assign all outside lines to the same number, press the key in step 3. In this case, the
display will show the contents programmed for outside line 01.
•
Example:
If the removed digits are assigned as "6" and the added number is assigned as "2", the
number sent from the network will be changed as follows: 854926
03
Six digits are deleted and "2" is added, and the number becomes "203".
• This programme becomes available when the programme [990] System Additional
Information, Area 06 - bit 12, is assigned to use this programme.
Features Guide References
Direct Dialling In (DDI)
To Next Page
Loading...
