428 Default Values
[407-408] DIL 1:1 Extension – Day / Night All outside lines – Disable (Day / Night)
[409-410] Intercept Extension – Day / Night All outside line groups – Disable (Day / Night)
[411] Host PBX Access Codes All outside line groups – Not stored
[412] Pause Time All outside line groups – 1.5 s
[413] Flash Time All outside line groups – 600 ms
[414] Disconnect Time All outside line groups – 1.5 s
[415] CPC Signal Detection Outgoing Set Disable
[416] Reverse Circuit Assignment Regular
[417] Outside Line Name Assignment All outside lines – Not stored
[430] DID / TIE Format Number Assignment All outside line groups – Not stored
[431] DID / TIE Incoming Assignment All DID / TIE formats – Wink
[432] DID / TIE Outgoing Assignment All DID / TIE formats – Wink
[433] DID / TIE Subscriber Number Removed
Digit
All DID / TIE formats – RMV:0
[434] DID / TIE Added Number All DID / TIE formats – Blank
[435] DID / TIE Wink Time Out Assignment All DID / TIE formats – 16
[436] Outside-to-TIE Transfer All outside line groups – Disable
[437] TIE-to-Outside Transfer All outside line groups – Disable
[438] TIE-to-TIE Transfer All outside line groups – Enable
[439] TIE Security Type All outside line groups – Non
[440] Line Hunting Sequence All outside line groups – Small –> Large
[441] Voice Path Type All outside lines – 2 wire
[442] Voice Level (Transmit) All outside lines – -3 db
[443] Voice Level (Receive) All outside lines – -3 db
[444] TIE Receive Dial All outside line ports – Yes
Programme Default
To Next Page
Loading...
