Panasonic KX-TD816 - Page 431

Default Values 431
3 ISDN Programming
[806-807] Serial Interface (RS-232C)
Parameters
Port 1 / Port 2:
New line code = CR+LF; Baud rate = 9600; Word
length = 8;
Parity bit = Mark; Stop bit = 1
[809] DISA Security Type Trunk
[810] DISA Tone Detection Enable
[812] DISA DTMF Repeat Dial and Call – Repeat
[813] Floating Number Assignment Pager 1=196; Pager 2=197; Pager 3=296; Pager
4=297; DISA 1=198; DISA 2=298; MODEM=299;
E-Grp 1=191; E-Grp 2=192; E-Grp 3=193; E-Grp
4=194; E-Grp 5=291; E-Grp 6=292; E-Grp 7=293; E-
Grp 8=294
[814] Modem Standard CCITT
[815] DISA Built-in Automated Attendant
Number
Disable
[816] SMDR Output Mode Regular
[817] KX-TD197 / KX-TD198 Baud Rate Set V.34-33600
Programme Default
[012] ISDN Extension Number Set All ports – Not stored
[013] ISDN Extension Name Set All ports – Not stored
[018] Budget Management for ISDN Extension All ports – 0
[109] Expansion Unit Type KX-TD816: C;E
KX-TD1232: Master and Slave – C;E1;E2
[112] ISDN Network Type Assignment KX-TD816HK/KX-TD1232HK: Mode 39
Others: Mode 51
[140] DDI Number / Phantom Extension
Number Conversion
All locations – Blank
Programme Default