Panasonic KX-TD816 - Page 80

2.2 System Programming
80 General Programming
10.
Press
END
.
KX-TD1232
1.
Enter
117
.
Display: 117 VMS PORT ASN
2.
Press
NEXT
to programme the Master System.
Display example: Mast1:# # #
3.
Enter a
jack number
.
To delete the current entry, press
CLEAR
.
To change the current entry, press
CLEAR
and enter the new jack number.
4.
Press to enter another jack number.
5.
Repeat steps 3 through 4 to enter another jack number.
6.
Press
STORE
.
7.
Press
NEXT
to programme another jack number.
Display example: Mast2:# # #
8.
Repeat steps 3 through 5 to enter another jack number.
9.
Press
STORE
.
10.
Press
NEXT
to programme the Slave System.
Display example: Slav1:# # #
11.
Repeat steps 3 through 5 to enter another jack number.
12.
Press
STORE
.
13.
Press
NEXT
to programme another jack number.
Display example: Slav2:# # #
14.
Repeat steps 3 through 5 to enter other jack numbers.
15.
Press
STORE
.
16.
Press
END
.
Conditions
• Neither jack number 01 nor the manager extension can be assigned as a voice mail port jack.
• The jack numbers correspond to the voice mail port in numerical order.
Example: Stored jack numbers: Jacks 02, 03, 05, 08, 11, 13
Jack 02=Voice mail numbers 01, 02; Jack 03=Voice mail numbers 03, 04;
Jack 05=Voice mail numbers 05, 06; Jack 08=Voice mail numbers 07, 08;
Jack 11=Voice mail numbers 09, 10; Jack 13=Voice mail numbers 11, 12
Features Guide References
Voice Mail Integration for Digital Proprietary Telephones