ROPA Tiger 6 - Finish Order at Standard Equipment and R-Transfer Basic

Operation
R-Concept
133 / 564
6.3.2.3.4.1 Finish order at standard equipment and R-Transfer Basic
client
new client
client no.
client name
clients
23
17
24
The following describes how to enter the customer name, field name, driver name and
additional info at standard equipment or R-Transfer Basic. This data will be associ-
ated along with the machine data to the current order. Please click first on the field
„Client“ (17), then on the field „New client“ (23). Enter the customer name (at least 1
character required) and a customer number (at least 1 figure required) and finish your
entry with the ENTER key (24).
For entering the field name and driver name proceed according to the same scheme
as with the client name.