Operation
Infeed conveyor
290 / 564
6.15 Infeed conveyor
The infeed conveyor passes under the front axle and transports the beet from the lift-
ing unit to the first strainer wheel.
It is driven by an oil motor, directly flanged to the infeed conveyor gear unit.
6.15.1 Setting infeed conveyor rotational speed
Rpm infeed conveyor
Choose this function with R-Select.
+ Key = infeed conveyor faster
- Key = infeed conveyor slower
The transfer pipe affixed to the infeed conveyor, strainer wheel transfer point, is also
driven by the infeed conveyor gear unit and is coupled to the infeed conveyor drive for
rotating speed and direction.
The pressure of the hydraulic drive of the infeed conveyor is constantly displayed and
monitored on the R-Touch in load monitoring (2). When exceeding a warning thresh-
old determined by the driver (adjustable between 50% and 100%), the warning icon
flashes. Simultaneously, a warning tone sounds. For setting the warning threshold See
Page 138.
To Next Page
Loading...