Operation
Steering
204 / 564
6.10.2.4 Activating offset-steer
The preselected offset-steer is activated by briefly pressing the key (3) on the joystick.
Conditions for it:
Operating mode "Field" switched on and unload conveyor in lifting position.
Main steering switch unlocked.
The speed of the machine is at least 0.5 km/h.
Only after activation the articulation joint moves into the preselected position. Simulta-
neously, the rear axle is switched to potentiometer steering and automatically moves
to the position currently set by the hand potentiometer (14). When offset-steer is acti-
vated, the machine reacts to any change of the offset-steer stage.
Indication on the R-Touch:
Offset-steer 2 right active (1)
and rear axles in potentiometer steering mode (2)
Indication hand potentiometer setting (3)
ADVICE
As soon as stage 1 or 2 of offset-steer is activated, the safety guard is automatically
swung out.
To Next Page
Loading...