Operation
Steering
212 / 564
6.10.3.3 Activating rear wheels autopilot
Automatic rear axle steering may be activated either manually or automatically. Pre-
condition for activation is that on the R-Direct, in the menu "Autopilot", line "Front axle
signal of", the option "Share" or "Row+share" is set.
ADVICE
If, in the menu "Autopilot", line "Signal from front axle", the option "Row" is selected,
then the rear axle autopilot cannot be activated.
Manual activation of the rear axle autopilot is always possible, if on the R-Touch, in
the menu "Autopilot", line "Activation rear axles", the option "manual" is selected and
additionally the front axle autopilot has been activated by pressing on the footswitch
"Autopilot". To control, the R-Touch displays the icon on the front axle.
If the footswitch "Autopilot" is then released for at least a half second, and then
pressed for at least one second, then the rear axle autopilot is additionally activated.
The icon appears on the R-Touch on the front and rear axles.
ADVICE
Another method for switching the rear axle autopilot on and off is to click briefly the
field on the R-Touch. To switch on the rear axle autopilot using the field the
front axle autopilot must be already activated.
To Next Page
Loading...