ROPA Tiger 6 - Chassis Control Manual; Chassis Control Very Top; Chassis Control Bottom

Operation
Chassis
221 / 564
6.11.3.2 Chassis control "Manual"
Selection "Manual"
In the selection "Manual" you can move the right and left chassis cylinders in or out
sideward.
Example:
Raise the machine right, the right chassis cylinders drive out.
Press and hold the key (14) . Press additionally + key (41) in order to drive the
right chassis cylinders out or - key (42) to drive the right chassis cylinders in.
To drive out or in the left chassis cylinders press instead of the key (14) the key
(13) .
To drive all the chassis cylinders out and in, press and hold the keys (13) and (14).
With the keys + (41) and - (42) you can raise or lower the machine again.
14
13
41
42
6.11.3.3 Chassis control "Very top"
Selection "Very top"
The chassis cylinders of the rear axles drive completely out, the machine raises.
It simplifies work under the machine
6.11.3.4 Chassis control "Bottom"
Selection "Very bottom"
The chassis cylinders of the rear axles drive completely in, the machine lowers.
It simplifies refuelling of the machine