Operation
R-Concept
146 / 564
6.3.4.1 Configure light programs
The light programs 1-3 can be individually assigned according to your wish. To do this
switch on the lights you want to save in a program. Press and hold one of the program
keys to save the active lights in a program.
6.3.4.2 Ladder light
The "Coming Home" and "Leaving Home" functions are integrated into the machine.
To activate the Leaving Home function press the Leaving Home key (80) on the
ground operation over the left front wheel (See Page 92). The Coming Home function
is activated automatically when by turning off the ignition (turn the ignition from posi-
tion I to position 0) the headlights in driver's cabin roof were turned on. The headlights
in the cabin roof are turned after max. 6 minutes again off.
To Next Page
Loading...