Operation
Strainer wheels (turbines)
300 / 564
6.16.1.1 Adjust strainer wheels individually
If after reaching the cleaning stage 10, the key + is released first and then pressed for
several seconds, then the indication on the R-Touch switches to stage „Man“. In this
stage, the driver may individually set the rotational speed of each strainer wheel.
At the cleaning stage „Man.“, a blue selection bar appears on the R-Touch in the
selection field (4). Select with the rotary wheel at the R-Select the desired strainer
wheel, when pressing the rotary wheel the focus jumps on the strainer wheel. Press
again on the rotary wheel, so that the rotational speed can be changed. Confirm your
rotational speed setting by pressing on the rotary wheel.
6.16.1.2 Switching off strainer wheels
When you have reached cleaning stage 1, release the key - to press it again unin-
terrupted for several seconds. Then, the strainer wheels and infeed conveyor are
switched off (stage STOP).
To Next Page
Loading...