Operation
R-Concept
138 / 564
6.3.2.4 Readjusting warning thresholds
Select section Warning thresholds using the R-Direct and confirm the selection by
pressing the middle of the wheel.
The warning thresholds for the infeed conveyor drive, strainer wheel drive and eleva-
tor drive may be adjusted in this functional section.
Select the display bar for the desired drive by turning the wheel and confirm the selec-
tion by pressing the middle of the wheel. Then adjust the warning threshold by turn-
ing the wheel and confirm the setting by pressing the middle of the wheel. You exit this
menu respectively the function section using the RETURN key.
(1) Warning threshold infeed conveyor drive
(2) Warning threshold strainer wheel drive
(3) Warning threshold elevator drive
ADVICE
Touch the warning threshold on the screen and move it up or down. In such a way you
can adjust the warning threshold directly on the R-Touch.
To Next Page
Loading...