ROPA Tiger 6 - Setting Shaking Share Rotational Speed

Operation
Lifter
267 / 564
6.14.7 Setting shaking share rotational speed
It is often reasonable to set the shares to a shaking movement during lifting. This
shaking movement is created by a hydraulically driven eccentric shaft.
Shaking share rotational speed
Choose this function with R-Select.
+ Key = Shaking share rotational speed
higher
- Key = Shaking share rotational speed
lower
After reaching the stage 1, shaking movement may be completely switched off releas-
ing and newly pressing the key - for several seconds.
As soon as depth control is switched off, the shaking movement is also stopped. It
begins only when depth control works again.
ADVICE
Lifting share cleaning function:
The lifting share cleaning function operates even if the machine drive is shut off.
Model 1:
Press and hold the + and - keys simultaneously to operate the shaking share drive at
maximum speed.
Model 2:
Press and hold the key to operate the shaking share drive at maximum speed.
ADVICE
To keep wear as low as possible, shaking share rotational speed must be set as low
as possible.