Maintenance and Service
Strainer wheels (turbines)
446 / 564
7.12 Strainer wheels (turbines)
All strainer wheel prongs must be retightened after the first
50 and 500 operating hours. Check all strainer wheel prongs daily. Any broken strainer
wheel prong must be replaced immediately; loose strainer wheel prongs must be tight-
ened immediately.
Should you find that on the already lifted spaces a larger quantity of beets is lying,
then either a guide grid bar or a strainer wheel prong has been broken. Immediately
replace the damaged part!
All strainer wheels and guide grids must be cleaned daily of foreign objects like binder
twine, jammed stones, etc.
Strainer wheel wiper
Check weekly. In case of need, readjust or replace.
(1) Strainer wheel wiper
To Next Page
Loading...