Operation
Steering
214 / 564
6.10.3.4 Quick description: manual activation of rear wheels autopilot
On R-Touch in menu "Autopilot", "Front axle
signal of" set on "Share" or "Row+share".
Set "Activation rear axles" to 'manual'.
↓
Select operating mode "Field" .
↓
Unlock the main steering switch.
↓
Switch on machine.
↓
Lower three-point suspension.
↓
Drive at least 1 km/h.
↓
Press the foot switch for autopilot once or
the key (3) (offset-steer) on the joystick.
The icon appears now only at the front
axle, only the front axle autopilot is active.
↓
Release footswitch "Autopilot" for at least 0.5 sec.
↓
Press the footswitch "Autopilot" for at least
1 sec. The icon appears on R-Touch on the
front axle and rear wheels. Autopilot is active.
↓
Automated steering is switched off
when the steering wheel is moved or
the three-point suspension is lifted.
To Next Page
Loading...