ROPA Tiger 6 - Lubricating and Operating Supplies

Lists/Tables/Plans/Diagrams/Maintenance Verification
Lubricating and operating supplies
529 / 564
9.1 Lubricating and operating supplies
Component Lubricant type
Filling vol-
ume:
Intervals
Diesel engine
Engine oil
Engine oil, semi-synthetic
Volvo standard VDS-3, ECEA E7, API CI-4
approx.
48 litres
every 500 oper. hrs.
Exception:
Sulphur content is
max. 15 ppm (See
Page 369)
Cooling system
Corrosion/antifreeze agent
-40° as per Volvo standard:
Volvo Penta Coolant VCS (yellow)
approx.
60 litres
every 4 years,
every 8000 oper. hrs.
Fuel tank
Diesel fuel
DIN EN 590
(max. 0.001% sulphur by weight) (10 ppm)
ASTM D975 1-D and 2-D
(max. 0.0015% by weight sulphur) (15 ppm)
A sulphur content of 0.3% (3000 ppm)
is only permitted with the RT6a
1320 litres when needed
AdBlue® tank (RT6c only)
AdBlue®
DIN 70070 / ISO 22241
130 litres when needed
Axles
Reduction gears
at 1st rear axle
Fully synthetic gear oil
API GL5, SAE 75W-90
approx. 3 litres
Differential gears
→ front axle
→ 1st rear axle
LS gear oil
API GL 5, SAE 90, LS
approx.
23 litres
approx.
30 litres
→ 2nd rear axle approx.
30 litres
Planetary gears
all 3 axles, 2 pcs. each
each approx.
9.2 litres (See
Page 407)
Portal drives
only front axle, 2 pcs.
each approx.
8.25 litres
annually
RR lifter
Lifting rollers left front approx.
6.2 litres
Short lifting rollers left front each approx.
0.8 litres
Paddle gears approx.
0.5 litres
Depth-control shaft gears left
and right
Gear oil
API GL 5, SAE 90
each approx.
1.0 litres
Shaking share gears
Fully synthetic gear oil
API GL5, SAE 75W-90
approx.
0.5 litres
annually
Share body bearing
Linear guide per row
Gear oil
API GL 5, SAE 90
each approx.
0.15 litres
none
none