Operation
Steering
198 / 564
6.10.1.4 U-turn steer in the operating mode "Road"
For safety reasons, this function may and can be used only at a reduced speed.
In practice, this function is used for passing narrow turns.
Once the steering variant U-turn is enabled, the articulated joint bends always match-
ing the front wheels. Thus, it follows any movement of the front wheels. At the same
time, the rear wheels move opposite to the front wheels. Thus, the manoeuvrability of
the machine is significantly improved.
To activate the function you should:
– Reduce speed.
– Unlock the main steering switch (44).
– Press the key (9) on the joystick.
Steering indicator appears on the R-Touch:
To Next Page
Loading...