Safety
Leakage
37 / 564
2.20 Personal protective equipment
Wear tight-fitting clothing to prevent accidents. Particularly, do not wear ties, scarves,
rings or chains that may be caught by moving machine parts. Wear appropriate head-
gear for long hair.
Do not carry highly inflammable objects, e.g. matches and lighters in your pockets.
All persons staying within the area of effect of the machine are situationally obliged to
wear the following protective equipment:
Always
Safety shoes with slip-resistant soles.
Tight-fitting working protective clothing.
Additionally for transport or assembly work
Protective helmet.
Additionally for maintenance
Cut-resistant gloves.
Protective cream (make a skin protection plan).
Protective goggles.
Eye/face protection and acid resistant gloves (when working on the battery).
Tight-fitting working protective clothing with long sleeves.
Heat and coolant-resistant protective gloves (when working on the cooling system).
Oil-resistant protective gloves (when working on oil-containing systems).
When working on the AdBlue system: protective goggles (tightly sealed goggles)
and gloves in accordance with Material Safety Data Sheet.
Additionally if noise emissions exceed the limit value
Ear protection.
Additionally on public roads
Warning vest.
2.21 Leakage
The following measures shall be taken in case of leakage:
– Switch off the effective component and set it pressure-free if possible.
– Place a suitable container underneath.
– Exchange a component/sealing.
– Remove immediately and completely leaked substance.
To Next Page
Loading...