ROPA Tiger 6 - Quick Description: Cruise Control in Operating Mode Road; Switching on Cruise Control in Operating Mode Field

Operation
Driving
176 / 564
6.7.4.3 Quick description: cruise control in operating mode "Road"
Start engine.
↓
Select operating mode "Road" .
↓
Drive faster than 10 km/h.
↓
Press the toggle switch (34) "Cruise control on/off"
or
Briefly press the key (10) on the joystick
or
Hold the multifunctional key (11) pressed, while
briefly pressing the joystick all the way forward
↓
Ways to switch off the cruise control:
Press the toggle switch (34) "Cruise control on/off"
or
Briefly press the key (10) on the joystick
or
Pull the joystick backward
6.7.4.4 Switching on cruise control in operating mode "Field"
Cruise control may only be switched on in operating mode "Field", if the following con-
ditions are met:
Operating mode "Field" switched on (displayed on the R-Touch),
Driver's cabin door is closed,
Lifting unit lowered and depth control active,
Driving speed at least 0.5 km/h.
When the cruise control is switched on, it assumes the speed preset on the R-Touch
(2).
2
1
(1) Driving speed
(2) Cruise control set speed
Before switching on the cruise control, you should:
– manually steer the machine into the beet rows,
– begin lifting (refer to the section "Lifting"),
– Use the drive pedal to bring the driving speed (1) closer to the cruise control set
speed (2).