Operation
R-Concept
139 / 564
6.3.3 Warning and status indications on the R-Touch
Red warning indicators that lead to engine stop
Engine oil pressure too low Hydraulic fluid too hot
Serious engine problems, immedi-
ately switch off engine
Lubrication pump distributor gear
failed
Coolant level too low Hydraulic oil level too low
Coolant temperature too high
(1) Time until engine is automatically switched off
(2) Error description
In the case of some severe operational outages, the diesel engine switches itself off
after a certain time. An error message appears on the R-Touch. An entry is logged in
the fault memory at the same time. The engine can be restarted at the driver’s own
responsibility, e.g. to move off a railway crossing.
To Next Page
Loading...