Operation
Defoliator
235 / 564
6.13.4 Defoliator discharge activity
It is necessary, for even topping of the beets, that the defoliator shaft is always moved
at the correct height. To avoid sinking in of the defoliator into the ground in case of wet
soil or those with low load bearing capacity, it may be hydraulically relieved so that the
depth-control wheels hardly bear any load.
This defoliator relief is performed using the defoliator relief cylinder and the associated
pressure reservoir. The relief pressure can be read on the R-Touch.
(3) Defoliator relief cylinder
(1) Reset defoliator pressure relief left
(2) Defoliator pressure relief right
To Next Page
Loading...