Maintenance and Service
Air conditioning and ventilation system
467 / 564
7.16.2 Recirculating filter
The recirculating filter (1) is located in the cabin floor behind the driver‘s seat, under a
covering hood.
(1) Recirculating filter
This filter must be cleaned in case of
need. For this purpose:
– Pull out the recirculating filter (1)
upward by the flap (2).
– Blow out recirculating filter using com-
pressed air.
– Reinsert the cleaned recirculating fil-
ter. Pay attention to the flow direction.
The printed arrow (3) on the filter must
point in the direction of windscreen.
This filter element (ROPA
item no. 352042200) should be renewed
once a year in any case.