ROPA Tiger 6 - Safety and Protective Equipment

Safety
Safety and protective equipment
39 / 564
2.24 Safety and protective equipment
Perform a documented function test after work on safety equipment. Perform a regular
function check of safety equipment, keep maintenance intervals.
The safety equipment of the machine consists of:
Emergency stop switch in the operating console.
Back run warning system.
Battery main switch.
Battery emergency stop switch.
Protective covers, protective doors, safety switches.
Safety circuits.
Rotating beacons.
Safety guard.
DANGER
Risk of inactive safety devices.
Defect or overridden protective devices can not prevent from severe injuries and haz-
ards.
– After maintenance work and before the restart of the machine, make sure in any
case that all protective devices are fully assembled and functional.
Overview
1
5
4
3
6
7
2
(1) Bunker door with safety switch
(2) Rotating beacon rear
(3) Safety guard
(4) Emergency stop switch battery
(5) Protective rubber at strainer wheel
(6) Emergency stop switch in the operating console
(7) Rotating beacon front