Operation
Infeed conveyor
295 / 564
6.15.4.2 Setting infeed conveyor height front
The height position of the infeed conveyor with respect to the last lifting roller may be
set using the turnbuckle (1) on the suspending cable rope (2). The conveyor should
generally be set as high as possible to preserve space below the conveyor for soil
cleaned off.
ADVICE
But the infeed conveyor may not be raised so far that the flow of beets from the lifting
rollers to the conveyor is impaired by this. In no case may the suspension (4) for the
tightening cable rope (2) be set so that it touches the upper end of the slotted hole (3).
To Next Page
Loading...