Malfunction and Remedies
Jacking up for wheel change
515 / 564
8.10 Jacking up for wheel change
DANGER
Hazard of fatal injuries!
– For safety reasons, the machine must be always jacked up only on one axle and
on one side.
– To jack up park the machine on even and sufficiently stable ground.
– Secure the machine against rolling by engaging the parking brake and using the
wheel chocks.
– For jacking up the front axle (1) you will need the ROPA hoist for portal axles,
ROPA item no. 018078600, the contour plate, ROPA item no. 018078800.
– To jack up the rear axles (2) you will need the ROPA hoist, ROPA
item no. 018078700.
– Place the jack in the marked area (1) or (2).
– Once the machine is lifted, it has to be additionally secured with massive load bear-
ing timbers or similar materials against crashes. For the wheel change we recom-
mend fixing the ROPA safety stand (ROPA item no. 018041400)to the wheel hub.
To Next Page
Loading...