Operation
Chassis
217 / 564
6.11 Chassis
Roll stabilization system
Compared to previous chassis of 3-axle beet harvesters this reduces the sway of
machine by one third. It is caused by hydraulic connection of stabilization cylinders at
the front and rear axles of the one side, so that the ground unevenness at the wheel in
level difference affects the frame only to 33 per cent - roll stabilization of the chassis.
Thanks to the reduction of the chassis swing, the row and depth control is improved
simultaneously, as the frame is averaged to the position of both axles.
On a side slope load difference between uphill and downhill side is distributed evenly
on front and rear axles - load compensation for better traction and sustainable soil pro-
tection. The hydraulic connection of the axles distributes the load always equally.
To Next Page
Loading...