ROPA Tiger 6 - Setting the Unload Rotating Speed

Operation
Bunker unloading
334 / 564
6.19.3 Setting the unload rotating speed
When the machine drive is switched off during unloading of the bunker, then the speed
of the diesel engine is automatically set to 850 rpm. If you wish another rotational
speed of the diesel engine, you may set it in the menu "Main settings", submenu
"Bunker", in the line "Unload engine rpm pile".
Bunker
Bunker auger delay (sec)
Unloading engine rpm pile
Unloading engine rpm lifting
Unloading stage 2 speed %
Start delay unloading stage 4
Unload conveyor lag (sec)
Leaf-spreader speed by overload
850
2
Off
50
1300
5
850
3
If the bunker is unloaded onto a driving alongside vehicle during the lifting, the rota-
tional speed of the diesel engine is automatically adjusted to 1300 rpm. If you wish
another rotational speed of the diesel engine, you may set it in the menu "Main set-
tings", submenu "Bunker", in the line "Unload engine rpm lifting".
Bunker
Bunker auger delay (sec)
Unloading engine rpm pile
Unloading engine rpm lifting
Unloading stage 2 speed %
Start delay unloading stage 4
Unload conveyor lag (sec)
Leaf-spreader speed by overload
1300
2
Off
50
1300
5
850
3