Operation
Road traffic
190 / 564
– Secure the additional chassis against accidental movement.
– Remove the hook on the right and left chain hoist from the eyelets.
– Press and hold the deadman switch (12). Raise the two chain hoists fully up with
the keys (2) and (4).
– Reverse carefully away from the uncoupled additional chassis.
– Touch the "field mode" field (15). The machine moves the scalper bracing tube, the
depth-control roller and the share body to the last set position.
– Press the key . The coupling mode is terminated, the icon and the LED in
the key disappears.
To Next Page
Loading...