Safety
Safety stickers on the machine
31 / 564
355007000 (34)
Shut down the engine before per-
forming maintenance and repair
work and pull out the ignition key.
Read the operating manual and
comply with remarks on safety.
355006800 (39)
Hazard due to electrical current!
Observe a sufficiently safe distance
to high-voltage power lines.
355006900 (41)
Burning hazard due to hot surfaces!
Keep sufficient distance to hot sur-
faces!
355007600 (24)
Only touch machine parts when they
have come to a complete stop.
355007100 (1)
Before starting up, read the operat-
ing manual respectively the main-
tenance manual and observe all
remarks on safety.
355007500 (9)
Chain drive! Body parts or clothing
may be pulled in with the running
drive. Before opening the cover,
stop the machine and secure it
against accidental startup!
355006400 (52)
Hazard due to the machine inadver-
tently rolling away. Secure machine
against inadvertently rolling away
using a wedge before uncoupling or
parking it.
355006600 (21)
Belt drive! Body parts or clothing
may be pulled in with the running
drive. Before opening the cover,
stop the machine and secure it
against accidental startup!
355007300 (50)
Hazard due to machine parts swing-
ing down. Never step into the haz-
ard zone of raised and unsecured
machine parts.
355018600 (20)
Never reach into the crushing dan-
ger area as long as the parts there
are still moving.
355006300 (33)
Hazard from parts being flung away
with the engine running. Keep a suf-
ficient safety distance!
355008100 (40)
Hazard of discharge of liquids under
high pressure. Before performing
maintenance and repair work, read
the operating manual and comply
with remarks on safety.
To Next Page
Loading...