Operation
Bunker
317 / 564
When the bunker is filled for 80% in the rear, the rotating direction of the auger is auto-
matically switched after expiry of an adjustable delay period. This delay period may be
set in the menu "Main settings", submenu "Bunker", line "Time bunker auger".
Unloading engine rpm pile
Unloading engine rpm lifting
Unloading stage 2 speed %
Start delay unloading stage 4
Unload conveyor lag (sec)
Leaf-spreader speed by overload
This delay period is required to completely fill up the rear part of the bunker. If the
auger is switched to the front filling direction, then the driver is informed about this by
a triple beeping sound. After the auger has switched direction, the R-Touch indicates
a value of between 80% and 100% for filling level of the bunker. When the bunker is
filled up (indication 98%), then the driver is informed by 6 beeps. The machine drive
must then be switched off.
ATTENTION
When the bunker is completely filled up, then the elevator is no longer able to transfer
the conveyed beets to the auger. This overloads the drive. The elevator conveyor is
clogged and forcibly blocked.
To Next Page
Loading...