Operating Components
Driver’s seat
70 / 564
Backrest adjustment
CAUTION
Take care with the backrest frame – it may jerk forward and cause injury!
– Hold the backrest hand tight before adjusting.
The backrest is adjusted using the locking
lever (arrow).
The locking lever must latch into the
desired position. It should not be possible
to move the backrest into another position
when it is locked.
Horizontal suspension
Under certain driving conditions, it is use-
ful to activate the horizontal suspension.
This means that shock impacting in the
driving direction can be better absorbed
by the driver seat.
Position 1 = horizontal suspension on
Position 2 = horizontal suspension off
Shock absorption
The damping of the seat can be adjusted
to suit the characteristics of the road or
field surface. The comfort of the suspen-
sion can be adjusted for the individual.
Rotate the lever to the desired setting and
release.
Position 1 = soft
Position 2 = medium
Position 3 = hard
The manufacturer recommends position 2
as the basic setting for drivers of average
weight.
To Next Page
Loading...