Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 257 AP disconnected event (continued)
Event AP disconnected
Displayed on the web
interface
AP [{apName&&apMac}] disconnected
Description This event occurs when the AP disconnects from the controller.
Auto Clearance This event triggers the alarm 303, which is auto cleared by the event code 312.
AP IP address updated
TABLE 258 AP IP address updated event
Event AP IP address updated
Event Type apIPChanged
Event Code 304
Severity Informational
Attribute “apMac"="xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
AP [{apName&&apMac}] reset because of an IP address change
Description This event occurs when the AP is reset due to a change in the IP address.
AP reset to factory default
TABLE 259 AP reset to factory default event
Event AP reset to factory default
Event Type apFactoryReset
Event Code 305
Severity Informational
Attribute “apMac”=”xx:xx:xx:xx:xx:xx”
Displayed on the web
interface
AP [{apName&&apMac}] reset to factory default settings
Description This event occurs when the AP is reset to factory default settings.
AP channel updated
TABLE 260 AP channel updated event
Event AP channel updated
Event Type apChannelChanged
Event Code 306
Severity Informational
Attribute “apMac"="xx:xx:xx:xx:xx:xx", “radio”="xxx", “fromChannel”="xx",
“toChannel”="xx"
Displayed on the web
interface
AP [{apName&&apMac}] detected interference on radio [{radio}] and has switched
from channel [{fromChannel}] to channel [{toChannel}]
Description This event occurs when the AP detects the radio interference and switches to
another channel.
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
174 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English