Ruckus Wireless Virtual SmartZone High Scale - SSH Tunnel Switched; Cluster Remove Node Started; Node Back in Service

TABLE 410 Cluster upload failed event (continued)
Event Cluster upload failed
Severity Major
Attribute "clusterName"=”xxx”, "reason"=”xxx”
Displayed on the web
interface
Cluster [{clusterName}] upload failed. Reason:[{reason}]
Description This event occurs when the cluster upload process fails.
SSH tunnel switched
TABLE 411 SSH tunnel switched event
Event SSH tunnel switched
Event Type sshTunnelSwitched
Event Code 833
Severity Major
Attribute "clusterName"="xx", "nodeName"="xx", "nodeMac"="xx.xx.xx.xx.xx.xx",
"wsgMgmtIp"="xx.xx.xx.xx",
"status"="ON->OFF", "sourceBladeUUID"="054ee469"
Displayed on the web
interface
Node [{nodeName}] SSH tunnel switched [{status}]
Description This event occurs when the SSH tunnel is switched.
Cluster remove node started
TABLE 412 Cluster remove node started event
Event Cluster remove node started
Event Type removeNodeStarted
Event Code 834
Severity Informational
Attribute "clusterName"=”xxx”, "nodeName" =”xxx”, "nodeMac"=”xx:xx:xx:xx:xx”
Displayed on the web
interface
Start to remove node [{nodeName}] from cluster [{clusterName}]
Description This event occurs when the node start is removed.
Node back in service
TABLE 413 Node back in service event
Event Node back in service
Event Type nodeBackToInService
Event Code 835
Severity Informational
Attribute "clusterName"="xx", "nodeName" =”xxx”, "nodeMac"=”xx:xx:xx:xx:xx”
Displayed on the web
interface
Node [{nodeName}] in cluster [{clusterName}] is in service
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 229