Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 669 Diameter invalid version event (continued)
Event Diameter invalid version
Description This event occurs when the version in the diameter header of received CER is
invalid.
Diameter peer add error
NOTE
This event is not applicable for vSZ-H.
TABLE 670 Diameter peer add error event
Event Diameter peer add error
Event Type diaPeerAddError
Event Code 1407
Severity Critical
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff” “mvnoId”=12 “srcProcess”=”<Application
Name>” “realm”=”ruckus.com" “originHost” = “Node1” "SCGMgmtIp"="2.2.2.2"
“peerIp” = “3.3.3.3” “peerName” = “OCS1” “peerRealmName” =
“organization.com” “desc” = ”Failed to add Peer” “appropriate cause”
Displayed on the web
interface
[{srcProcess}] Failed to add Peer [{peerName}], Realm [{peerRealmName}] on
{produce.short.name} [{SCGMgmtIp}]
Description This event occurs when the diameter stack fails to add a peer to the peer table.
Diameter peer add successful
NOTE
This event is not applicable for vSZ-H.
TABLE 671 Diameter peer add successful event
Event Diameter peer add successful
Event Type diaPeerAddSuccess
Event Code 1408
Severity Debug
Attribute ”ctrlBladeMac”=“aa:bb:cc:dd:ee:ff”,”mvnoId”=“839f87c6-d116-497e-afce-
aa8157abd30c”, “srcProcess”=“<Application Name>“,”realm”=“ruckus.com”,
“originHost” = “Node1”,”SCGMgmtIp”=“2.2.2.2”,”peerIp” = “3.3.3.3”,”peerName”
= “OCS1”,”peerRealmName” = “organization.com”,”desc” = “Peer addition
successful”
Displayed on the web
interface
[{srcProcess}] Peer [{peerName}] Realm [{peerRealmName}] addition is
successful on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs when the peer addition is successful.
Events Types
System Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
320 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English