Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 66 VLAN configuration mismatch on non DHCP/NAT WLAN alarm (continued)
Alarm VLAN configuration mismatch detected between configured and resolved VLAN
with DVLAN/VLAN pooling configuration on non-DHCP/NAT WLAN
Description This alarm is triggered when the AP detects a non DHCP/NAT WLAN. VLAN
configuration mismatches with DVLAN/VLAN pooling configuration on gateway
AP.
VLAN configuration mismatch on DHCP/NAT WLAN
TABLE 67 VLAN configuration mismatch on DHCP/NAT WLAN alarm
Alarm VLAN configuration mismatch detected between configured and resolved VLAN
with DVLAN/VLAN pooling configuration on DHCP/NAT WLAN
Alarm Type apCfgDhcpNatWlanVlanConfigMismatch
Alarm Code 1025
Severity Critical
Aggregation Policy From the event code 1023 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “ssid”=”xxxx”, “wlanID”=”xxxx”, “configuredVlan”=”5”, “vlanId”=”11”,
"apMac"=""xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
DHCP/NAT gateway AP [{apMac}] detected VLAN configuration mismatch on
DHCP/NAT WLAN [{ssid}]. Configured VLAN is [{configuredVlan}] and resolved
VLAN is [{vlanId}]. Clients may not be able to get IP or access Internet.
Description This alarm is triggered when the AP detects a DHCP/NAT WLAN. VLAN
configuration mismatches with DVLAN/VLAN pooling configuration on gateway
AP.
NOTE
Refer to Configuration Events on page 240.
Alarm Types
Configuration Alarms
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 89

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English