Ruckus Wireless Virtual SmartZone High Scale User Manual

AP country code updated
TABLE 261 AP country code updated event
Event AP country code updated
Event Type apCountryCodeChanged
Event Code 307
Severity Informational
Attribute “apMac"="xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
AP [{apName&&apMac}] reset because of a country code change
Description This event occurs when a change in country code causes the AP to reset.
AP channel updated because dynamic frequency selection (DFS)
detected a radar
TABLE 262 AP channel updated because dynamic frequency selection (DFS) detected a radar event
Event AP channel updated because dynamic frequency selection (DFS) detected a
radar
Event Type apDfsRadarEvent
Event Code 308
Severity Informational
Attribute “apMac"="xx:xx:xx:xx:xx:xx", “radio”="xxx", “channel”="xx"
Displayed on the web
interface
AP [{apName&&apMac}] detected radar burst on radio [{radio}] and channel
[{channel}] went into non-occupancy period
Description This event occurs when the AP detects a radar burst on the radio and the
channel moves to a non-occupancy mode.
AP change control plane
TABLE 263 AP change control plane event
Event AP change control plane
Event Type apChangeControlBlade
Event Code 311
Severity Informational
Attribute “apMac”=”xx:xx:xx:xx:xx:xx”, “oldwsgIP”=”xxx.xxx.xxx.xxx”,
“newwsgIP”=”xxx.xxx.xxx.xxx”
Displayed on the web
interface
AP [{apName&&apMac}] switched from {produce.short.name} [{oldCpName||
oldWsgIP}] to {produce.short.name} [{cpName||newWsgIP}].
Description This event occurs when the AP switches from an existing controller connection to
a new connection.
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 175

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English