Ruckus Wireless Virtual SmartZone High Scale - Wired Client Session Expired; Application Identified

TABLE 374 Wired client authorization successfully event (continued)
Event Wired client authorization successfully
Event Code 2806
Severity Informational
Attribute apMac”=“xx:xx:xx:xx:xx:xx”, ”clientMac”=“xx:xx:xx:xx:xx:xx”,
“ethProfileId”=“xxxxx”, "ethPort"="x", "iface"="xxxx", "tenantUUID"="xxxxxxxx-
xxxx-xxxx-xxxx-xxxxxxxxxxxx", "apName"="xxxx","vlanId"="x",
"userName"="xxxx"
Displayed on the web
interface
Client [{userName||IP||clientMac}] of LAN [{ethPort}] from AP [{apName&&apMac}]
was authorized.
Description This event occurs when a client on WLAN AP is authorized.
Wired client session expired
TABLE 375 Wired client session expired event
Event Wired client session expired
Event Type wiredClientSessionExpiration
Event Code 2808
Severity Informational
Attribute apMac”=“xx:xx:xx:xx:xx:xx”, ”clientMac”=“xx:xx:xx:xx:xx:xx”,
“ethProfileId”=“xxxxx”, "ethPort"="x", "iface"="xxxx", "tenantUUID"="xxxxxxxx-
xxxx-xxxx-xxxx-xxxxxxxxxxxx",
"apName"="xxxx","vlanId"="x","rxBytes"="x","txFrames"="x",
"txBytes"="x","disconnectTime"="x","sessionDuration"="x",
"disconnectReason"="x"
Displayed on the web
interface
Client [{userName||IP||clientMac}] exceeded the session time limit.
Session terminated.
Description This event occurs when a client exceeds the session time limit, which results in a
session termination.
Application identified
TABLE 376 Application identified event
Event Application identified
Event Type application of user is identified
Event Code 8001
Severity Informational
Attribute
Displayed on the web
interface
APP[{APP}] identified from AP[{apMac}] for client [{STA_MAC}] with
source[{SRC_IP}:{SRC_PORT}] destination[{DST_IP}:{DST_PORT}]
Proto[{PROTO}]
Description This event occurs when the user of the application is identified.
Events Types
Client Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 217