Ruckus Wireless Virtual SmartZone High Scale - Accounting Events; Accounting Session Started

TABLE 172 3rdparty AP connected event (continued)
Event 3rd party AP connected
Severity Debug
Attribute "mvnoId"=12,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"SCGMgmtIp"="2.2.2.2" "apMac"="aa:bb:cc:dd:ee:aa"
"apIpAddress"="10.1.4.11" "srcProcess"="radius"
Displayed on the web
interface
3rd Party AP with Ip [{apIpAddress}] and MAC [{apMac}] is connected to Control
plane [{ctrlBladeMac}] in zone [{zoneName}]
Description This event occurs when a non-Ruckus AP connects to the controller.
Accounting Events
NOTE
This event is not applicable for vSZ-H.
Following events are related to accounting.
• Accounting session started on page 142
• Accounting session start failed on page 143
• Accounting session disabled on page 143
• Accounting session stopped successfully on page 144
• Accounting session stopped failed on page 144
• Accounting session interim failed on page 144
• Accounting server not reachable on page 145
• Accounting failed over to secondary on page 145
• Accounting fallback to primary on page 146
• AP accounting message mandatory parameter missing on page 146
• Unknown realm on page 146
• AP accounting message decode failed on page 147
• AP accounting retransmission message dropped on page 147
• AP accounting response while invalid config on page 148
• AP account message drop while no accounting start message on page 148
• Unauthorized COA/DM message dropped on page 149
Accounting session started
NOTE
This event is not applicable for vSZ-H.
TABLE 173 Accounting session started event
Event Accounting session started
Event Type accSessStarted
Event Code 1232
Severity Debug
Events Types
Accounting Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
142 Part Number: 800-71565-001 Rev A