Ruckus Wireless Virtual SmartZone High Scale User Manual

Session Alarms
NOTE
This section is not applicable for vSZ-H.
Following is the alarm related to session.
• Binding failed on page 120
Binding failed
TABLE 129 Binding failed alarm
Alarm Binding failed
Alarm Type bindingFailure
Alarm Code 5010
Severity Major
Aggregation Policy From the event code 5010 an alarm is raised for every event. A single event
triggers a single alarm.
Auto Clearance The alarm is auto cleared with the event code 5009.
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”, “SCGMgmtIp”=”2.2.2.2”,
“lmaIp”=”1.1.1.1”, “ueMacAddr”=”aa:bb:cc:gg:hh:ii”,
“dataBladeIp”=”3.3.3.3”, “ueIpAddr”=”5.5.5.5”
Displayed on the web
interface
Binding for [{ueMacAddr}] UE binding update failure on {produce.short.name}-D
[{dataBladeIp}]. Failure Cause [{cause}].
Description This alarm is logged when the mobile node binding fails.
Recommended Actions No action is required.
NOTE
Refer to Session Events on page 296.
STA Interface Alarms
NOTE
This section is not applicable for vSZ-H.
Following are the alarms related to STA interface.
• STA authentication failed transport down on page 121
• STA authentication failed failure response on page 121
• STA authentication failed decode failure on page 121
• STA re-authorization failed on page 122
• STA response timer expired on page 122
• Retransmission exhausted on page 123
Alarm Types
Session Alarms
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
120 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English