TABLE 594 LMA ICMP unreachable event (continued)
Event LMA ICMP unreachable
Attribute “ctrlBladeMac”=“aa:bb:cc:dd:ee:ff”,”SCGMgmtIp”=“2.2.2.2”,”lmaIp”=“1.1.1.1”
Displayed on the web
interface
[{lmaIp}] ICMP unreachable on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs when the PMIPv6 daemon is unable to connect to the local
mobility anchor (LMA) server through the ICMP packet.
Auto Clearance This event triggers the alarm 5006, which is auto cleared by the event code 5005.
LMA server unreachable
TABLE 595 LMA server unreachable event
Event LMA server unreachable
Event Type lmaHbUnreachable
Event Code 5007
Severity Debug
Attribute “ctrlBladeMac”=“aa:bb:cc:dd:ee:ff”,”SCGMgmtIp”=“2.2.2.2”,”lmaIp”=“1.1.1.1”
Displayed on the web
interface
[{lmaIp}] fail have been detected on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs when the PMIPv6 daemon detects either restart or failure of the
LMA server.
LMA failed over
TABLE 596 LMA failed over event
Event LMA failed over
Event Type lmaFailOver
Event Code 5008
Severity Major
Attribute “ctrlBladeMac”=“aa:bb:cc:dd:ee:ff”,”SCGMgmtIp”=“2.2.2.2”,”lmaIp”=“1.1.1.1”
Displayed on the web
interface
[{lmaIp}] Failover on {produce.short.name} [{SCGMgmtIp}]
Description This event s logged when the standby LMA transits to an active mode. This
includes the control plane identifier of the newly active LMA.
DHCP connected
TABLE 597 DHCP connected event
Event DHCP connected
Event Type connectedToDHCP
Event Code 5101
Severity Debug
Attribute “ctrlBladeMac”=“aa:bb:cc:dd:ee:ff”,”SCGMgmtIp”=“2.2.2.2”
Displayed on the web
interface
PMIPv6 process connect to DHCP server successfully on {produce.short.name}
[{SCGMgmtIp}]
Events Types
PMIPv6 Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 293