EasyManuals Logo

Ruckus Wireless Virtual SmartZone High Scale User Manual

Ruckus Wireless Virtual SmartZone High Scale
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
TABLE 122 Config update failed alarm (continued)
Alarm Config update failed
Aggregation Policy From the event code 5004 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”, "SCGMgmtIp"="2.2.2.2",
“cause”=”reason”,
Displayed on the web
interface
Failed to apply configuration [{cause}] in PMIPv6 process at {produce.short.name}
[{SCGMgmtIp}]
Description This alarm is logged when the PMIPv6 gets an error or a negative
acknowledgment or improper/incomplete information from the D-bus client.
Recommended Actions Check to ensure that the IP address of the CGF server received from PDNGW/
GGSN is configured in the controller web interface > Configurations > Services
and Profiles > CGF. Configure the IP address is it is missing.
LMA ICMP unreachable
TABLE 123 LMA ICMP unreachable alarm
Alarm LMA ICMP unreachable
Alarm Type lmaIcmpUnreachable
Alarm Code 5006
Severity Major
Aggregation Policy From the event code 5006 an alarm is raised for every event. A single event
triggers a single alarm.
Auto Clearance The alarm is auto cleared with the event code 5005.
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”, "SCGMgmtIp"="2.2.2.2", "lmaIp"="1.1.1.1"
Displayed on the web
interface
[{lmaIp}] ICMP unreachable on {produce.short.name} [{SCGMgmtIp}].
Description This alarm is triggered when the PMIPv6 daemon cannot connect to the LMA
server through the internet control message protocol (ICMP) packet.
Recommended Actions Check the network connectivity between local mobility anchor (LMA) and data
plane. Also check the LMA server status from the LMA connectivity page on the
controller web interface.
LMA failed over
TABLE 124 LMA failed over alarm
Alarm LMA failed over
Alarm Type lmaFailOver
Alarm Code 5008
Severity Major
Aggregation Policy From the event code 5008 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “ctrlBladeMac"="aa:bb:cc:dd:ee:ff”, "SCGMgmtIp"="2.2.2.2",
“lmaIp”=”1.1.1.1”
Displayed on the web
interface
[{lmaIp}] Failover on {produce.short.name} [{ctrlBladeMac}]
Alarm Types
PMIPv6 Alarms
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 117

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruckus Wireless Virtual SmartZone High Scale and is the answer not in the manual?

Ruckus Wireless Virtual SmartZone High Scale Specifications

General IconGeneral
BrandRuckus Wireless
ModelVirtual SmartZone High Scale
CategoryGateway
LanguageEnglish

Related product manuals