EasyManuals Logo

Ruckus Wireless Virtual SmartZone High Scale User Manual

Ruckus Wireless Virtual SmartZone High Scale
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #187 background imageLoading...
Page #187 background image
TABLE 297 NAT VLAN capacity restored detected by NAT gateway AP due to (at least) one out of the three (3)
consecutive NAT gateway AP IP were down is now up event (continued)
Event NAT VLAN capacity restored detected by NAT gateway AP due to (at least) one
out of the three (3) consecutive NAT gateway AP IP were down is now up
gateway IPs which were down. The NAT traffic for affected clients is restored
back.
Description This event occurs when the AP detects at least one of the three (3) consecutive
gateway APs IPs that had failed is now UP.
AP NAT failure detected by SZ due to three (3) consecutive NAT gateway
APs are down
TABLE 298 AP NAT failure detected by SZ due to three (3) consecutive NAT gateway APs are down event
Event AP NAT failure detected by SZ due to three (3) consecutive NAT gateway APs are
down
Event Type apNATFailureDetectedbySZ
Event Code 346
Severity Critical
Attribute "apMac1"="xx:xx:xx:xx:xx:xx", "apMac2"="xx:xx:xx:xx:xx:xx",
"apMac3"="xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
NAT failure detected by SZ since three (3) consecutive NAT gateway IPs are
down AP1=[{apMac1}] AP2=[{apMac2}] AP3=[{apMac3}] (All consecutive NAT
APs are down in case of less than 3 NAT Gateway APs configured). The NAT
traffic for some of the clients may get affected for the respective VLANs.
Description This event occurs when the controller detects three (3) consecutive failures of
NAT server APs.
AP health high airtime utilization flag
TABLE 299 AP health high airtime utilization flag event
Event AP health high airtime utilization flag
Event Type apHealthAirUtilizationFlag
Event Code 347
Severity Warning
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "currentValue"="xxxxx",
"configuredThreshold"="xxxxx", "radio"="X.XG"
Displayed on the web
interface
AP [{apName&&apMac}] flagged {{radio}} airtime utilization health [{currentValue}]
because it crossed the threshold [{configuredThreshold}].
Description This event occurs when an AP is flagged because the radio has crossed the
latency health threshold configured by the administrator.
AP health high airtime utilization clear
TABLE 300 AP health high airtime utilization clear event
Event AP health high airtime utilization clear
Event Type apHealthAirUtilizationClear
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 187

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruckus Wireless Virtual SmartZone High Scale and is the answer not in the manual?

Ruckus Wireless Virtual SmartZone High Scale Specifications

General IconGeneral
BrandRuckus Wireless
ModelVirtual SmartZone High Scale
CategoryGateway
LanguageEnglish

Related product manuals